International Journal of Trend in Scientific Research and Development

India traditionally has been belligerent to any changes. But with the need to curb environmental emissions it has been identified that there is a need to switch from ICE vehicles to Electric Vehicles. This switch is eminent and a necessity in order to fight the climatic and environmental changes which is affecting all living life whether in land, water or air. It is a fact that with substantial shift in the automobile industry towards Electric Vehicles disruption in the automobile supply Chain in imminent. It is true that for those suppliers who are heavily leveraged and unable to adapt it could spell a disastrous financial troubles ahead. This study is an attempt to identify how production and supply of electric vehicles will impact the traditional supply chain in India and suggest ways and methods to incorporate the changes. An attempt has also been made in this study to identify the perception of individuals regarding Electric Vehicle. Because it is the people's choice which will lead to boon or bane for this segment of automobiles. 

by Anuj Vishwamohan Nair "A Study on Customer Perception of Electric Vehicle and Its Impact on Traditional Supply Chain in India" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47516.pdf 

Paper URL : https://www.ijtsrd.com/engineering/automotive-engineering/47516/a-study-on-customer-perception-of-electric-vehicle-and-its-impact-on-traditional-supply-chain-in-india/anuj-vishwamohan-nair

callforpaperbiologicalscience, biologicalsciencejournal

Several automobile industries are working on it to maintain a proper temperature for increasing the efficiency and also to prevent the engine from thermal damage. So it become important to analyse fins structure for better heat transfer rate. High temperature on the surface of engine block effect the efficiency of engine. Increasing number of fins is not only the criteria to increase the heat dissipation from the surface of fins. Generally, rectangular fins are used in motor bike engine, although the temperature at the surface is in safe limit. By introducing new geometry of fin and if the minimum temperature of new geometry is less than or near about the minimum temperature of rectangular fin is not only help in increasing the efficiency of engine block but also it may help in reducing the weight of engine block. Convective heat transfer is the mechanism of heat transfer and it depends on convective heat transfer coefficient and Contact surface area with air. Fins are surfaces that extend from an object to increase the rate of heat transfer to or from the environment by increasing convection. And the analysis is done by numerical method and on Solid Works software. 

by Vikrant Yadav | Pankaj Yadav ""Overview of Disc Brake""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31530.pdf

Paper Url :https://www.ijtsrd.com/engineering/automotive-engineering/31530/overview-of-disc-brake/vikrant-yadav

callforpaperlanguages, languagesjournal, bestjournal

by Priyanshu Kumar Tiwari | Pushkar Verma | Prince Tiwari | Vijay Kumar Gupta ""Review Paper on New Automotive 'Camless Engine'""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd29892.pdf

Paper Url : https://www.ijtsrd.com/engineering/automotive-engineering/29892/review-paper-on-new-automotive-camless-engine/priyanshu-kumar-tiwari

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

by Piyush Aggarwal | Pravesh Sharma | Prashant Siddhu ""Ackermann Steering System - A Review""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd29911.pdf

Paper Url : https://www.ijtsrd.com/engineering/automotive-engineering/29911/ackermann-steering-system-%E2%80%93-a-review/piyush-aggarwal

internationaljournalofscience, openaccessjournalofscience, ugcapprovedjournalsforscience 

By D. Y. Dasin | I. Yahuza "Production and Characterization of Biodiesel Fuel Derived from Neem (Azadirachta Indica) Seed using Two Cylinder Diesel Engine Model"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23903.pdf

Paper URL: https://www.ijtsrd.com/engineering/automotive-engineering/23903/production-and-characterization-of-biodiesel-fuel-derived-from-neem-azadirachta-indica-seed-using-two-cylinder-diesel-engine-model/d-y-dasin

ugc approved journals in mathemetics, ugc approved journals for science, ugc approved journals for social science

by Kislaya Anand | Goutam R. "An Autonomous UAV for Pesticide Spraying"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23161.pdf

Paper URL: https://www.ijtsrd.com/engineering/automotive-engineering/23161/an-autonomous-uav-for-pesticide-spraying/kislaya-anand

URL: http://www.ijtsrd.com/papers/ijtsrd19188.pdf

Direct Link: http://www.ijtsrd.com/engineering/automotive-engineering/19188/modelling-and-simulation-of-some-combustion-parameters-intport-1-and-intvalve-1-using-gt-power-engine-simulation-software-with-biodiesel-ethanol-diesel-blends-as-fuel/i-yahuza

open access journal of engineering, ugc approved journals for engineering, call for paper engineering

URL: http://www.ijtsrd.com/papers/ijtsrd18485.pdf

Direct Link: http://www.ijtsrd.com/engineering/automotive-engineering/18485/non-linear-analysis-of-diesel-engine-connecting-rod/vytla-jayaprakash


call for paper medical science, ugc approved journals for social science, languages journal

URL: http://www.ijtsrd.com/papers/ijtsrd14099.pdf

Direct Link - http://www.ijtsrd.com/engineering/automotive-engineering/14099/review-paper-on-improved-exhaust-emission-control-by-the-use-of-cu-zeolite-catalyst-based-catalytic-converter/akash-pathak

call for paper pharmacy, ugc approved journals with low publication fees, technology journal

URL: http://www.ijtsrd.com/papers/ijtsrd10916.pdf

Direct Link - http://www.ijtsrd.com/engineering/automotive-engineering/10916/hydro-pneumatic-suspension-with-intelligent-active-suspensioning-system/m-boopathi

special issue publication, manuscript publication, biological science journal

Our understanding of Air flow behavior around an object makes us better designer in order to achieve better performances from our automobiles. In this paper we present an analysis of air flow via air-intake system required to meet FSAE norms in SUPRA Vehicles.The aim of this project is to create a flow restriction device to be fitted in the SAE (Society of Automotive Engineers) car being built by Team Zenith, GB Pant Engineering College, New Delhi.

The car is an open wheeled race vehicle, designed to go from 0-60 mph in under 4 seconds and have a top speed of about 80-90 mph.An Air-intake system in a FSAE SUPRA Vehicle consists of various components as followed: -1) Air Filter2) Air Restrictor3) Plenum4) Intake Manifold.Air enters at the filter and passes through restrictor, which is used to increase velocity and drop pressure and then enters into plenum which is used to provide better distribution of air flow and to prevent further drop in pressure.

Design of Air restrictor is critical as per norms of FSAE due to fixed minimum neck diameter of 20 mm as demonstrated below. Fig: - Basic structure of restrictor, plenum and runnerThis is done primarily to limit the power capability from the engine. Since the maximum mass flow rate is now a fixed parameter because of the restrictor, the aim is to allow the engine to achieve the maximum mass flow with minimal pull from the engine.

In short, the pressure difference between atmosphere and the pressure created in the cylinder should be minimal, so that maximum airflow into the engine at all times.Our study revolves around finding such combination of angles of inclination and rise of the restrictor which should provide the vehicle maximum performance within limits directed by FSAE.We have simulated various design of Air restrictors based on different pair of angles for the Air-restrictor that could make a significant impact in the performance of the engine.The software we used for the same are ANSYS, SolidWorks.

by Sushil Pant | Pankaj Kumar | Ranjan Kishor "Design and Analysis of Air Intake System for Single Cylinder Engine"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd8388.pdf

Direct Link - http://www.ijtsrd.com/engineering/automotive-engineering/8388/design-and-analysis-of-air-intake-system-for-single-cylinder-engine/sushil-pant

Automotive Engineering, Paper Publication

The aim of this paper is to illustrate an improvement in the existing technology used in metro train movements. This train is equipped with a controller and an IR Object sensor that enables the automatic stopping of the train from one station to another station.

This paper presents the development process of a prototype for a driverless train implemented using a RASPBERRY PI controller. Simulation for the system's circuits is done with LabVIEW software. The hardware circuit is interfaced with actuators and sensors for automation purposes using LabVIEW.

A hardware comprised of IR sensor, RASPBERRI PI areassembled in a prototype train. A LabVIEW CODE is used for programming the controller. A Smoke sensor is also interfaced to detect any smoke or gas present in the train.

by Manoj Kumar M | Hemavathi.R | H. Prasanna Kumar "Driverless Metro Train Shuttle between the Stations using LabVIEW""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7088.pdf

Direct Link - http://www.ijtsrd.com/engineering/automotive-engineering/7088/driverless-metro-train-shuttle-between-the-stations-using-labview/manoj-kumar-m

Automotive Engineering, Engineering Journal

In this paper, A few automated processes for a partial automation which can be mostly used in residential areas and industries. It is developed using PLC. It has explained the process of ETP in industries. The process include different parameters like flow, level, pH, DC motor, solenoid valves, pump are controlled by using PLC (Allen Bradley Micrologix 820) and simulated by using software CCW (Connected Component Workbench) .

As we know that effluents emitted by industries contains harmful chemicals which could lead to effect on environment and society. So by retreating these effluents could be a blessing in disguise. This process can't be going through using manual process so here we need some automotive tools for that.

That is why we make use of PLC (programmable logic controller). PLC is recommended instead of other automation devices because of its versatility, robustness, reprogrammable nature and many other significant features.

by Chaitra S S | K. P. Shobha | H. Prasanna Kumar "pH Control in Effluent Treatment Plant using PLC"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7059.pdf

Direct Link - http://www.ijtsrd.com/engineering/automotive-engineering/7059/ph-control-in-effluent-treatment-plant-using-plc/chaitra-s-s

Automotive Engineering, International Journal

Traffic signals are the most convenient method of controlling traffic in a busy junction. Present traffic Signals fail to control the traffic effectively when a particular lane has got more traffic than the other lanes. In this paperan intelligent traffic control system using PLC is proposed.

System measures the traffic density on each road bycounting the number of vehicles and then takes the decision. Programming is done using ladder diagram. Seimens S7-1200 PLC is have been used for the system implementation.

Traffic management on the road has become a severe problem of today's society because of growth of the urbanization. This leads to traffic jam at the traffic junctions which in turn causes delay to ambulances. In order to overcome this problem, this paper presents a simple ambulance controlled traffic system.

The main objective of this system is that to control the traffic, allowing an ambulance to arrive at a particular location without it having to stop anywhere until the destination is reached. This system includes RF Transmitter & Receiver technology and Lab VIEW software.

by Mamatha R "Traffic light Controller for the Congested Urban Route using PLC & Ambulance Detection using RF Transmitter & Receiver with Lab VIEW"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd5954.pdf 

Direct URL: http://www.ijtsrd.com/engineering/automotive-engineering/5954/traffic-light-controller-for-the-congested-urban-route-using-plc-and-ambulance-detection-using-rf-transmitter-and-receiver-with-lab-view/mamatha-r-

Filling is a task carried out by machine that packages cold drinks and water. It also includes volume selection menu through which user can input the desired volume to be filled in bottle.

The filling operation is carried out by Programmable Logic Controller (PLC). Because PLC is cost effective, very flexible, reduce complexity, space efficient.

By programming PLC we can control entire system

by Arun Kumar.M | H. Prasanna Kumar "Automatic Bottle Filling System Using PLC"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd5953.pdf 

Direct URL: http://www.ijtsrd.com/engineering/automotive-engineering/5953/automatic-bottle-filling-system-using-plc/arun-kumarm

Nowadays turbo-chargers are preferred for commercial vehicle especially to ensure the good operating conditions at higher loads. Turbo-matching is a complex task and carried out by many methods. Recent manufacturing trend added many components in supplier chain.

This piece of investigation adopts test based methodologies to perform such matching. The simulation is used to predict the operating conditions at various speeds. The same verified with data-logger method which is like on road test.

The routes preferred for evaluating the various routes namely rough road, highway matching performance are: Rough Road, Highway, City Derive, slope up and slope down. The compressor map used for analyse the appropriateness of matching by methods and suggesting the appropriate turbocharger.

by Badal Dev Roy | Dr. R. Saravanan "Investigation on Appropriateness of Turbo-matching of B60J68 and A58N70 Turbochargers for a Commercial Vehicle"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd5958.pdf 

Direct URL: http://www.ijtsrd.com/engineering/automotive-engineering/5958/investigation-on-appropriateness-of-turbo-matching-of-b60j68-and-a58n70-turbochargers-for-a-commercial-vehicle/badal-dev-roy