International Journal of Trend in Scientific Research and Development: Industrial Engineering

Showing posts with label Industrial Engineering. Show all posts

Wednesday 4 August 2021

Review on Green Supply Chain Management as a Strategic Approach for Better Corporate Performance

Team IJTSRD August 04, 2021 0

Development based on sustainability is the key to ensure a firm’s endurance and green supply chain management practices improves performance by considering environmental laws and standards, increasing customer awareness, and reducing adverse environmental effects through products and services. Strategies aligned with the green supply chain helps firms with creation of opportunities for better performance and meet the requirements of sustainability. This review paper aims to gain insights based on management of the green supply chain and its strategic effect on corporate performance through competitiveness. Based on the review, it is confirmed that a greener supply network has various benefits related to it and implementing green supply chain practices in sync with strategic planning can enhance corporate performance of firms in varied aspects. However, it also highlighted a research gap as there are limited studies showcasing the measured effect of greener supply network strategies and initiatives on corporate performance of a firm. Lastly, the paper contributes with avenues for further research with the possibilities of strategic approaches for a greener value chain to elucidate its impact quantitatively.

Sanath. N | Shreyas Modak | Dr. Nagesh. S "Review on Green Supply Chain Management as a Strategic Approach for Better Corporate Performance" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021,

URL: https://www.ijtsrd.com/papers/ijtsrd43805.pdf

Paper URL: https://www.ijtsrd.com/engineering/industrial-engineering/43805/review-on-green-supply-chain-management-as-a-strategic-approach-for-better-corporate-performance/sanath-n

ugcapprovedjournalswithlowpublicationfees, conferenceissuepublication

Thursday 20 August 2020

Factors Affecting Job Satisfaction and Productivity of Sewing Line Workers A Study on Selected Readymade Garment Industries in Myanmar

Team IJTSRD August 20, 2020 0

Industrial Engineering

Factors Affecting Job Satisfaction and Productivity of Sewing Line Workers A Study on Selected Readymade Garment Industries in Myanmar

A basic requirement for job satisfaction among sewing line workers is a working environment that allows workers to perform their work at an optimal level in a comfortable environment. The working environment plays an essential role in workers job satisfaction and the impact of job satisfaction on productivity. A causal study was conducted to examine the impact of the working environment on job satisfaction and productivity of workers in the garment manufacturing industries. In this study, six factors of the work environment were considered for job satisfaction, which are, working conditions, remuneration, job security, psychosocial work environment, ergonomics and work participation. Data was collected from four readymade garment industries in Myanmar using random sampling. Multiple regression analysis and simple linear regression were used to predict the correlation. Based on the finding, this study showed that working conditions, remuneration and psychosocial work environment have strong casual effect on workers’ job satisfaction and job security and ergonomics are moderate and work participation is low casual effect on workers’ job satisfaction.

by Aung Myo Lwin | Yin Yin Tun "Factors Affecting Job Satisfaction and Productivity of Sewing Line Workers: A Study on Selected Readymade Garment Industries in Myanmar"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd32974.pdf

Paper Url :https://www.ijtsrd.com/engineering/industrial-engineering/32974/factors-affecting-job-satisfaction-and-productivity-of-sewing-line-workers-a-study-on-selected-readymade-garment-industries-in-myanmar/aung-myo-lwin

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

Friday 13 March 2020

The Designing and Weighting of Key Performance Indicators using the SCOR Approach and AHP in XYZ Weaving Company

Team IJTSRD March 13, 2020 0

Industrial Engineering

The Designing and Weighting of Key Performance Indicators using the SCOR Approach and AHP in XYZ Weaving Company

Competition between companies is becoming more intense, which is why each company must improve their performance. Supply Chain Management becomes an important part of a company in order to determine an efficient business strategy. One way is to measure supply chain performance. The first step that must be taken is to determine and weigh the Key Performance Indicator as a measurement of supply chain performance measurement in XYZ Weaving Company with the Supply Chain Operations Reference SCOR approach. The result of the study is that there are 23 KPIs with their respective weights on each level. The highest weight on Level 1 is on the Make process with a weight value of 0.357. The highest weight on level 2 is on the Reliability variable with a total weight of 0.424, while the highest weight on level 3 is on the Time needed to manufacture products with a total weight of 0.067.

by Ni Kadek Jayanthy Nilasari ""The Designing and Weighting of Key Performance Indicators using the SCOR Approach and AHP in XYZ Weaving Company""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30348.pdf

Paper Url :https://www.ijtsrd.com/engineering/industrial-engineering/30348/the-designing-and-weighting-of-key-performance-indicators-using-the-scor-approach-and-ahp-in-xyz-weaving-company/ni-kadek-jayanthy-nilasari

internationaljournalofscience, openaccessjournalofscience, ugcapprovedjournalsforscience

Wednesday 18 December 2019

Analysis of Different Controllers used for Boiler Drum Level Control by using LabVIEW Simulation

Team IJTSRD December 18, 2019 0

Industrial Engineering

Analysis of Different Controllers used for Boiler Drum Level Control by using LabVIEW Simulation

An intelligent model is developed to control the water level in boiler drum. There are three different types of boiler control such as i Single element boiler drum level control, ii Two element boiler drum level control and iii Three element boiler drum level control. This paper provides the k nowledge about the Fuzzy PID Controller and the various PID controller design methods such as Zeigler Nichols method, Tyreus Luyben method, Internal Model Control IMC . Comparative study is made on the performance of the PID and Fuzzy PID controller for better control system design.

by Sumit Patel | Vinit Sharma "Analysis of Different Controllers used for Boiler Drum Level Control by using LabVIEW Simulation"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29704.pdf

Paper URL: https://www.ijtsrd.com/engineering/industrial-engineering/29704/analysis-of-different-controllers-used-for-boiler-drum-level-control-by-using-labview-simulation/sumit-patel

review papers, call for paper social science, submit paper online

Analysis of Different Controllers used for Boiler Drum Level Control by using LabVIEW Simulation

Team IJTSRD December 18, 2019 0

Industrial Engineering

An intelligent model is developed to control the water level in boiler drum. There are three different types of boiler control such as i Single element boiler drum level control, ii Two element boiler drum level control and iii Three element boiler drum level control. This paper provides the knowledge about the Fuzzy PID Controller and the various PID controller design methods such as Zeigler Nichols method, Tyreus Luyben method, Internal Model Control IMC . Comparative study is made on the performance of the PID and Fuzzy PID controller for better control system design.

by Sumit Patel | Vinit Sharma "Analysis of Different Controllers used for Boiler Drum Level Control by using LabVIEW Simulation"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29704.pdf

Paper URL: https://www.ijtsrd.com/engineering/industrial-engineering/29704/analysis-of-different-controllers-used-for-boiler-drum-level-control-by-using-labview-simulation/sumit-patel

review papers, call for paper social science, submit paper online

Tuesday 21 August 2018

Beneficial Usage of Autoclaved Aerated Concrete Block

IJTSRD August 21, 2018 0

Industrial Engineering

Beneficial Usage of Autoclaved Aerated Concrete Block

This paper is about the study of beneficial usage of AAC block production in Mother Industrial Co., Ltd (AAC and APC block factory). Autoclaved Aerated Concrete is one of such green materials. It not only uses the waste material like fly ash but also provides adequate strength to structures. The main aim of this paper is to show the beneficial usage of AAC block instead of the use of conventional brick. For that, the beneficial usage of AAC block is showed on many ways. The beneficial usage of AAC block shows the cost saving calculation of AAC block. As the next way, the beneficial usage of AAC block shows the weight saving calculation of AAC block. Quality control chart (x bar and R chart) use to prove the benefit of AAC blocks in checking the production process. The other way is the compressive strength calculation between conventional brick and AAC block to show the benefit of AAC block. Finally, the power consumption cost saving calculation of AAC block compared with conventional brick is to show the benefit of AAC block.

By Khin War Oo | Su Nandar Hlaing" Beneficial Usage of Autoclaved Aerated Concrete Block"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd18207.pdf

Direct URL: http://www.ijtsrd.com/engineering/industrial-engineering/18207/beneficial-usage-of-autoclaved-aerated-concrete-block/khin-war-oo

international journals in engineering, call for paper engineering, open access journal of engineering

Saturday 18 August 2018

Process Improvement Using Statistical Process Control in a Small Scale Industry

IJTSRD August 18, 2018 0

Industrial Engineering

Process Improvement Using Statistical Process Control in a Small Scale Industry

Different methods are used in an organization to improve productivity, one such method is Statistical process Control(SPC).Statistical process control is a collection of tools, that when used together can result in process stability and variance reduction, thereby leading to a more streamlined production process. This paper presents a case study of SPC to improve the performance of current process by reducing the variability in the dimension of parts produced, there by diminish rejections and improving the process.

By carrying out mathematical calculations and using various SPC tools, process capability study was done under existing conditions, some improvements were done in the existing welding fixture used for producing the part to improve their capabilitiy indices. In this study after the application of SPC tools and integrating the suggested changes in existing process, great improvements were seen, as such the capability indices which were 0.1.1&0.38 respectively for the existing process, increased to 1.91&1.50 respectively for the improved process, thereby representing good process performance with higher strength.

By Bhushan S. Jogi | Lekrajsing R. Gour | Nikhil Turkar" Process Improvement Using Statistical Process Control in a Small Scale Industry"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd17144.pdf

Direct URL: http://www.ijtsrd.com/engineering/industrial-engineering/17144/process-improvement-using-statistical-process-control-in-a-small-scale-industry/bhushan-s-jogi

international journals in engineering, ugc approved journals for engineering, open access journal of engineering

Thursday 2 August 2018

Modeling of Queue Management System in Banking Industries

IJTSRD August 02, 2018 0

Industrial Engineering

Modeling of Queue Management System in Banking Industries

This study determined the performance measures of a queue management system in FIRST Bank Nigeria Plc; Nnamdi Azikiwe University, Awka. The variables measured include: the arrival rate and the service rate from a three server system over a given period of time of the day. Quantitative research method was employed in collecting the data.

The observed data was tested using chi-square goodness of fit test to determine if the arrival rates are Poisson distributed and the service rates are exponentially distributed. Multiple channel queuing models were used in analyses.

The mean arrival and service rates were 10.82 and 9.22 respectively, with a system utilization of 1.2. The probability of having zero customers in the system was used to determine the optimal number of servers needed in the system. It was concluded that Five (5) servers is appropriate instead of three (3) servers currently used by the establishment, using the system utilization of 1.2 to trace the probability of having zero customers in the system which was found to be 0.976 at five - servers (M=5). Five (5) server model is recommended for the establishment to reduce the total expected time customers has to wait, and that operation managers should not rely on existing queuing models only, but they should apply their discretion when a queue gets out of hand.

By Nwosu M. C. | Uhonmhoibhi K. E. | Okorie C. C. | Odii K. C." Modeling of Queue Management System in Banking Industries"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd16973.pdf

Direct URL: http://www.ijtsrd.com/engineering/industrial-engineering/16973/modeling-of-queue-management-system-in-banking-industries/nwosu-m-c

international journals in engineering, call for paper engineering, paper publication for engineering

Sunday 24 June 2018

Productivity Improvement in a Sewing Line Through Line Balancing in a Garment Manufacturing Company in the Philippines

IJTSRD June 24, 2018 0

Industrial Engineering

Productivity Improvement in a Sewing Line Through Line Balancing in a Garment Manufacturing Company in the Philippines

In any manufacturing company, productivity in terms of quality and cost required in doing the operation is the topmost priority to be considered. Productivity improvement was studied through the use of time and motion study and line balancing concept in one of the clusters of a sewing line in a garment manufacturing company. Series of observations in the line and direct interviews among the regular personnel involved in the operation were done including the sewers, pressers, and supervisors in charge of the assembly line.

It was noted that the average productivity rate of the selected assembly line was only seventy-one (71) percent way down below from their target output. Based on the findings of the study, plant layout was one of the contributing factors that causes bottleneck in the assembly line particularly in the pairing and aligning of cut goods. Task time involved in each process was studied and computed based on optimal number of manpower and expected productivity rate. In effect, combining the processes of pairing and aligning of cut goods in one line contributes great impact in reduction of machine requirements per process to improve the productivity rate of the company.

By Amaya, Flocerfida L | Delos Santos, Rafael, A | Tenorio, Rodolfo Jr. V" Productivity Improvement in a Sewing Line Through Line Balancing in a Garment Manufacturing Company in the Philippines"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd15666.pdf

Direct URL: http://www.ijtsrd.com/engineering/industrial-engineering/15666/productivity-improvement-in-a-sewing-line-through-line-balancing-in-a-garment-manufacturing-company-in-the-philippines/amaya-flocerfida-l

international journals in engineering, call for paper engineering, paper publication for engineering

Tuesday 8 May 2018

Application of Industrial Engineering to increase the productivity of an E-Rickshaw factory

IJTSRD May 08, 2018 0

Industrial Engineering

Productivity improvement is an important issue in small-scale industry. The profit earning of this industry largely depends on productivity improvement. This study shows the way of finding gap of production process and operations.

By implementing work study and method study and established new effective process for particular operation, we have to able to increase productivity. Especially this study shows the improvement of productivity in assembly area of E-rickshaw manufacturing industry. The line balancing is the key point to increase productivity to particular products.

After line balancing and critical analysis the work content was reduced by 9 minutes. Our proposed method helps to increase productivity to 19.97% with reduction of work content and line balancing.

by Harshna Gupta | Gaurav Chaudhary | Krishna Mohan Singh | Devendra Kumar | Ashish Malik "Application of Industrial Engineering to increase the productivity of an E-Rickshaw factory"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd12969.pdf

Direct Link - http://www.ijtsrd.com/engineering/industrial-engineering/12969/application-of-industrial-engineering-to-increase-the-productivity-of-an-e-rickshaw-factory/harshna-gupta

research publication, international peer reviewed journal, paper publication in science

Saturday 17 March 2018

Utilization of Melon and Snail Shell Waste Mixtures in the Carburization of Mild Steel

IJTSRD March 17, 2018 0

Industrial Engineering

Utilization of Melon and Snail Shell Waste Mixtures in the Carburization of Mild Steel

As long as industrial and agricultural activities go on, wastes will continue to be generated. In view of this, wastes recycling/or conversion to other reusable materials that can be utilize by another industrial set-up is fast receiving worldwide attention. In this research work, the assessment of the suitability of melon and snail shell wastes mixtures in enhancing the surface hardness of mild steel via the pack carburization method has been investigated.

The carburization process was carried out at the temperatures of 9000C, 9200C and 940oC for the soaking times of 15, 30, 45 and 60 minutes respectively, and then quenched in water toharden. Thereafter, they were tempered at 2500Cfor 1 hour to relieve the residual stresses introduced into the steel specimens as a result of quenching. Standard method was adopted to determine the surface hardness of the carburized and un-carburized test specimens.

Micro-structure examination was also performed using standard metallographic techniques to observe the microstructures formed. The results of the study showed increase in the surface hardness of all the carburized steel specimens in the different carburizing media. The steel specimens carburized with 80% snail shell wastes plus 20% melon shell wastes mixture had higher hardness values than those carburized with 100% snail shell wastes only.

The maximum surface hardness values of 118VHN, 128VHN and 129VHN were obtained at thecarburizing temperatures of 9000C, 9200C and 9400C respectively, for the soaking time of 60 minutes with thespecimens carburized with snail and melon shell wastes mix. It was observed that theprocess variables (temperature and soaking time) significantly impacted on the quantity of carbon absorbed at the steel surface as depicted by the surface hardness values.

The results of the research work have established the viability of melon and snail shell wastes mixture as an alternative source of carburizers in enhancing the surface hardness of mild steel.

by Adzor, S. Abella | Ihom, P. Aondona | Edibo, S."Utilization of Melon and Snail Shell Waste Mixtures in the Carburization of Mild Steel"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11353.pdf

Direct Link - http://www.ijtsrd.com/engineering/industrial-engineering/11353/utilization-of-melon-and-snail-shell-waste-mixtures-in-the-carburization-of-mild-steel/adzor-s-abella

call for paper physics, ugc approved journals for computer science, open access journal of engineering

Sunday 7 January 2018

Wireless Control 3D Printer with a Liquid Sprinkler Product Replacing Mechanism

IJTSRD January 07, 2018 0

Industrial Engineering

Wireless Control 3D Printer with a Liquid Sprinkler Product Replacing Mechanism

This paper introduces a wireless 3d printer with a liquid sprinkler mechanism for large scale production of certain types of products in industrial applications. The 3D printer can capable of producing 3 dimensional object from a designed model. Object model design by using CAD software.

The slicing software generates G-code, which gives instruction to 3d printer about its movements along three axis. Send This G-code to controller via wireless mode. 3d printer can produce a 3D object on the bed of deposition.

The final product may stick on bed of deposition. Replacement of product may cause damage in product and consuming much time for it. This problem is solved by spraying 1:1 water alcohol mixture on the end product.

Here a automatic liquid sprinkler sense the final product and automatically spraying the mixture on it.

by Nida K "Wireless Control 3D Printer with a Liquid Sprinkler Product Replacing Mechanism"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd9424.pdf

Direct Link - http://www.ijtsrd.com/engineering/industrial-engineering/9424/wireless-control-3d-printer-with-a-liquid-sprinkler-product-replacing-mechanism/nida-k

Industrial Engineering, Open Access Journal

Autonomous Trajectory Tracking and Contouring Control of Three Dimensional CNC

IJTSRD January 07, 2018 0

Industrial Engineering

Autonomous Trajectory Tracking and Contouring Control of Three Dimensional CNC

In this study we analyzed a three- axes computer numeric control (CNC) machine. Here improve the trajectory tracking and contouring performance of both linear and circular trajectories of a CNC.

This paper introduced an autonomous method for better trajectory tracking and contouring by different position sensors are placed on three-axes of CNC machines.

So reduce trajectory error and contouring error of CNC machines. This method is best solution for improve the trajectory tracking ability and precision of a CNC machine for both linear and circular trajectories.

by Henna A "Autonomous Trajectory Tracking and Contouring Control of Three Dimensional CNC"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd9419.pdf

Direct Link - http://www.ijtsrd.com/engineering/industrial-engineering/9419/autonomous-trajectory-tracking-and-contouring-control-of-three-dimensional-cnc/henna-a

Industrial Engineering, Paper Publication

Ad

Sponsor

Tags

Extra Ads

Search This Blog

Wednesday 4 August 2021

Thursday 20 August 2020

Friday 13 March 2020

Wednesday 18 December 2019

Tuesday 21 August 2018

Saturday 18 August 2018

Thursday 2 August 2018

Sunday 24 June 2018

Tuesday 8 May 2018

Saturday 17 March 2018

Sunday 7 January 2018

Ad

Social

Recent

Popular

Comments

Archive

Trending

Tags

Labels

Categories

Contact Form