International Journal of Trend in Scientific Research and Development: Mineral & Metallurgical Engineering

IJTSRD is a leading Open Access, Peer-Reviewed International Journal which provides rapid publication of your research articles and aims to promote the theory and practice along with knowledge sharing between researchers, developers, engineers, students, and practitioners working in and around the world in many areas. For any further information, feel free to write us on editor.ijtsrd@gmail.com

Showing posts with label Mineral & Metallurgical Engineering. Show all posts
Showing posts with label Mineral & Metallurgical Engineering. Show all posts

Wednesday 14 April 2021

Study of the Degree of Lightning and Filterability of a Suspension

April 14, 2021 0
Study of the Degree of Lightning and Filterability of a Suspension

The article examines the filtration process of zinc chloride released as a result of the reaction. The degree of filtration and the method of its separation were studied. The degree of filtration is determined at different speeds, temperatures. 


by Rosilov Mansur Sirgievich "Study of the Degree of Lightning and Filterability of a Suspension" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39934.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/39934/study-of-the-degree-of-lightning-and-filterability-of-a-suspension/rosilov-mansur-sirgievich

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Tuesday 15 December 2020

Results of Sulfuric Acid Leaching of Ash from Oil Shale from Aktau Deposit

December 15, 2020 0
Results of Sulfuric Acid Leaching of Ash from Oil Shale from Aktau Deposit

Hydrometallurgical methods are aimed at leaching to extract valuable components into a sulfuric acid solution, as well as selective extraction on ion exchange resins by sorption of valuable components such as vanadium oxide and molybdenum oxide. The presented methods are not implemented on an industrial scale, since there is no processing of oil shale in the Republic. A prospective scheme for processing ash from oil shale deposits has been analyzed. It includes the addition of sodium chlorine to the heat treatment process pyrolysis , the resulting ash is leached in vats with sulfuric acid 130 g l, at room temperature, S W = 1 3, duration 60 minutes. The resulting metal bearing sulfuric acid solution is filtered and sent to sorption, as well as precipitation. The extraction of metals into solution is more than 60 70 molybdenum and vanadium. It should be noted that with an increase in the consumption of sulfuric acid over 130 g l, the concentration of metals in the productive solution does not increase. For the extraction of metals from the productive solutions of leaching ash from oil shale in the Aktau deposit, the following ion exchange resins of the England Company PUROLITE were used for the extraction of molybdenum grade A 100 and vanadium grade A 109. 


by Almatov Ilhomjon Mirzabek Ogli "Results of Sulfuric Acid Leaching of Ash from Oil Shale from Aktau Deposit" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd38091.pdf

Paper URL : https://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/38091/results-of-sulfuric-acid-leaching-of-ash-from-oil-shale-from-aktau-deposit/almatov-ilhomjon-mirzabek-ogli

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience 

Monday 9 November 2020

Flotation Results of Oxidized Copper Ores of the Kalmakyr Deposit

November 09, 2020 0
Flotation Results of Oxidized Copper Ores of the Kalmakyr Deposit

According to preliminary calculations, oxidized copper ores in the dumps of the Kalmakyr deposit are about 107.6 million tons 01.01.2020 of which Balance ores 12.1 million tons with a Cu content of 0.8 Au 1.2 g t Ag 3.9 g t. Off balance ores 95.5 million tons with content Cu 0.3 Au 0.4 g t Ag 2 g t. Total metals copper 373 thousand tons, gold 56.6 tons, silver 246.5 tons. The total reserves of metals in the accumulated dumps are estimated at 373 thousand tons of copper, 56.6 tons of gold and 246.5 tons of silver, which is of interest primarily for non ferrous metallurgy. As a result of a set of studies carried out on samples of oxidized copper ore dumps from the Kalmakyr deposit, the following conclusions can be drawn Three methods hydrometallurgical, flotation and combined of processing oxidized copper ores of the Kalmakyr deposit have been shown experimentally and cathode copper with a content of 99.6 , a gold bearing concentrate with a gold content of 36.5 g t and silver content of 47.1 g t. Optimal modes and indicators of concentration efficiency are determined. On the basis of laboratory studies, a technology for processing oxidized copper ores of the Kalmakyr deposit has been proposed. Technological schemes for processing dumps of oxidized copper ores from the Kalmakyr deposit have been developed and recommended for implementation, the implementation of which will make it possible to obtain an estimated 6,183 tons of copper, 425 kg of gold and 707 kg of silver per year. 

by Usenov Rasul Bovirjonovich | Yusupkhodjaev Asad Mahamatovich | Kholtursunov Farkhod Nurmatovich "Flotation Results of Oxidized Copper Ores of the Kalmakyr Deposit" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd38006.pdf

Paper URL : https://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/38006/flotation-results-of-oxidized-copper-ores-of-the-kalmakyr-deposit/usenov-rasul-bovirjonovich

callforpaperpharmacy, pharmacyjournal, internationalpeerreviewedjournal

Monday 9 December 2019

Characterization and Dielectric Study of Mihaliccik Tremolite

December 09, 2019 0
Characterization and Dielectric Study of Mihaliccik Tremolite
The natural tremolite Ca2Mg5Si8O22 OH 2 was obtained from Mihaliccik district of Eskisehir, Turkey 39.8787N 31.3806E . It is a part of the amphibole family of silicate minerals. All the phases were described by X ray diffraction XRD , energy dispersive spectroscopy EDXRF , Raman, and Fourier transform infrared spectroscopy FTIR . The natural tremolite specimen used in this study includes mostly 54.4 SiO2, 22.82 MgO, 15.04 CaO, and 1.45 Al2O3. The natural tremolite sample used for the present investigation was not pure. The impurity was calcite. The FTIR spectrum and the Raman spectrum were recorded for natural tremolite sample in the range of 4000 and 350 cm 1 and 4000 and 70 cm 1 at room temperature, respectively. The natural tremolite and fired tremolite samples were prepared for this investigation. Dielectric measurements were realized in the 3 kHz ' 1 MHz frequency region and at the room temperature by using HP4192A LF Impedance Analyzer. The dielectric parameters of the samples were obtained the conclusions of the study were explained and given to be used for further investigations in some industrial productions. Ertugrul Izci "Characterization and Dielectric Study of Mihaliccik Tremolite" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29671.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/29671/characterization-and-dielectric-study-of-mihaliccik-tremolite/ertugrul-izci

engineering journal, open access journal of chemistry, indexed journal

Friday 2 August 2019

Study on the Analysis of Chromite Refractory Brick from Mwe Taung Chromite Ore

August 02, 2019 0
Study on the Analysis of Chromite Refractory Brick from Mwe Taung Chromite Ore

This research paper is the preliminary study of testing the feasibility of chromite ore to produce refractory. Chromite ore was taken from Mwe Taung, in Chin State, Myanmar. Chromite ore contains iron oxide, alumina, magnesia, lime, chromic oxide and silica. The prepared chromite has been extensively used for high temperature metallurgical reactions. The chemical analysis of chromite ore was done to know the composition. Composition expresses the percentage of oxide component which can able to determine whether the refractory is acidic, basic or neutral. The chromite ore studied in this research is neutral refractory. The experiment of chromite refractory brick production was carried out first, the chromite powder are reduced to 50 mesh, 100 mesh and 200 mesh through sieving and then, mixed with magnesium chloride as binder, applied to 400 tons pressure, heated at drying temperature 200°C for twenty four hours and at firing temperature 1580°C for fifty two hours to produce chromite refractory brick. Analysis of locally available chromite refractory brick produced is tested. The standard properties such as cold crushing strength, apparent specific gravity, apparent porosity, bulk density and water absorption. 


by Dar Nei Sung ""Study on the Analysis of Chromite Refractory Brick from Mwe Taung Chromite Ore""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26765.pdf

Paper URL: https://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/26765/study-on-the-analysis-of-chromite-refractory-brick-from-mwe-taung-chromite-ore/dar-nei-sung

call for paper papers in journals, call for paper in ugc approved journals

Sunday 25 February 2018

An Experimental Analysis of Turning Operation in SAE E52100 Alloy

February 25, 2018 0
An Experimental Analysis of Turning Operation in SAE E52100 Alloy
Turning is a one type of machining process typically a non-rotary tool bit by moving linearly while the work piece rotates. It is used to create a cylindrical part by cutting unwanted materials. Today computer numerical control can be used, better known as CNC. Axles and shafts can be manufactured by turning process.

by the different machining parameters such as feed, depth of cut and speed production rate and the quality of the product can also increase. Optical parameters play an important role in increase the productivity, reducing lead time with desired product quality at minimum cost. The experiments were conducted with Taguchi's L 9 mixed orthogonal array. 

EN 31 alloy steel can be machined by the Non-coated insert in computer numerical control lathe(CNC). By using the optical parameters individually for minimum surface roughness and maximum material removal rate(MRR) were found using taguchi analysis. 

by Rakesh.V | Ramesh. P | Sundar. C | Rajamurthy. G "An Experimental Analysis of Turning Operation in SAE E52100 Alloy" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd9631.pdf

Direct Link - http://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/9631/an-experimental-analysis-of-turning-operation-in-sae-e52100-alloy/rakeshv

special issue publication, manuscript publication, pharmacy journal

Tuesday 20 February 2018

An Experimental Analysis of Turning Operation in EN 31ALLOY

February 20, 2018 0
An Experimental Analysis of Turning Operation in EN 31ALLOY

Turning is a form of machining process which is used to create a cylindrical part by cutting away unwanted materials. Today the most common type of automation is computer numerical control, better known as CNC. 


Components such as axles, shafts can be manufactured by turning process. In that manufacturing unit mainly focuses on high quality with increased production rate and profit level of the firm and so it's important to determine the optimal machining parameters such as speed, feed and depth of cut. This works deals with the selecting the optimal parameters that plays a critical role in increasing the productivity with desired product quality at minimum cost and reduced lead time. 

The experiments were conducted with Taguchi's L 9 mixed orthogonal array. Coated insert was used to machine the EN 31 alloy steel work pieces on computer numerical controlled (CNC) lathe. The optical parameters were found using Taguchi's approach individually for minimum surface roughness and maximum material removal rate (MRR) and were compared with the results obtained from Grey relation analysis. 

by Sundar.C | Rakesh. V | Ramesh. P | Rajamurthy. G "An Experimental Analysis of Turning Operation in EN 31ALLOY" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd9633.pdf

Direct Link - http://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/9633/an-experimental-analysis-of-turning-operation-in-en-31alloy/sundarc-|-rakesh-v

call for paper economics, list of ugc approved journals, chemistry journal

Ad