Concrete is the most widely used construction material has several desirable properties like high compressive strength, stiffness and durability under usual environmental factors. At the same time concrete is brittle and weak in tension. Plain concrete has two deficiencies, low tensile strength and a low strain at fracture. These shortcomings are generally overcome by reinforcing concrete. Normally reinforcement consists of continuous deformed steel bars or pre-stressing tendons. The advantage of reinforcing and pre-stressing technology utilizing steel reinforcement as high tensile steel wires have helped in overcoming the incapacity of concrete in tension but the ductility magnitude of compressive strength. Fibre reinforced concrete (FRC) is a concrete made primarily of hydraulic cements, aggregates and discrete reinforcing fibres. FRC is a relatively new material. This is a composite material consisting of a matrix containing a random distribution or dispersion of small fibres, either natural or artificial, having a high tensile strength.
Due to the presence of these uniformly dispersed fibres, the cracking strength of concrete is increased and the fibres acting as crack arr esters. Plain concrete possess very low tensile strength, limited ductility and little resistance to cracking .Internal micro cracks are inherently present in concrete and its poor tensile strength is due to propagation of such micro cracks. Fibres when added in certain percentage in the concrete improve the strain properties well as crack resistance, ductility, as flexure strength and toughness. Mainly the studies and research in fibre reinforced concrete has been devoted to steel fibres. In recent times, glass fibres have also become available, which are free from corrosion problem associated with steel fibres. The present paper outlines the experimental investigation conducts on the use of glass fibres with structural concrete. CEM-FILL anti crack, high dispersion, alkali resistance glass fibre of diameter 14 micron, having an aspect ratio 857 was employed in percentages , varying from 0.33 to1 percentage by weight in concrete and the properties of this FRC (fibre reinforced concrete) like compressive strength, flexure strength, toughness, modulus of elasticity were studied.
By Sheikh Gowhar Nazir | Mr. Misbah Danish" To Determine the Mechanical Properties of Concrete by Using Glass Fibre and Polypropylene Fibre"
Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,
Paper URL: http://www.ijtsrd.com/papers/ijtsrd17019.pdf
Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/17019/to-determine-the-mechanical-properties-of-concrete-by-using-glass-fibre-and-polypropylene-fibre/sheikh-gowhar-nazir
paper publication for engineering, engineering journal, ugc approved journals for engineering
No comments:
Post a Comment